Chronics

Welcome to Services MSP, new authorized distributor for the Abitibi-Témiscamingue region (Canada, Quebec).

Welcome to Services MSP, new authorized distributor for the Abitibi-Témiscamingue region (Canada, Quebec).

MSP Services is a mechanical services and mining development company, headquartered in Pikogan. They offer a mobile service in heavy equipment mechanics, electromechanics, stationary mechanics, welding services and also, qualified and duly trained personnel, to fill development positions in the mining field.

Services MSP distribue tous les produits offerts par le Groupe Alltech, tel que :

• Allfett- Automatic greasing system
• Mega – Range limiting device
• Pfreundt – On-board scale
• NBS-Cam – Backup camera and pedestrian detection
• Laserline – Laser guidance
• OKO – Tire sealant
• Sentinel – Dump up sensor  

Services & Expertise 

MSP Services is gradually expanding and diversifying its operations. We plan in the future to become a mining contractor and develop these own projects.

Our growing team is gaining experience and each of our employees play a major role in our expansion. The experience of our team gives us the chance to perform in several areas in the mining and industrial sector.

For more information or to request a quote:

Services MSP

10, Tom Rankin

Pikogan, Qc, J9T 3A3 Canada

Phone: 819 355-3280

Email : admin@servicesmsp.ca

Web Site : https://services-msp.client.rubberduck.io/fr /  

Groupe Alltech – The strength of a network!

Our after sales service is our strength. Alltech Group has established a distribution network which insures local services in particular regions. With many distributors across eastern Canada, the Alltech Group puts at your disposal a real network allowing you to ensure service no matter where you are located. Our distributors have highly qualified staff which are trained according to our standards enabling them to perform installations and service calls , as much on the construction sites as within your company.

The experience of each distributor generates our strength of our network . Together we formed a team that is at your service!

Find a distributor 

Welcome to Thunder Bay Hydraulics, new authorized distributor for the Thunder Bay region (Canada, Ontario).

Since 1969, Thunder Bay Hydraulics has been a premier Canadian manufacturer of hydraulic and pneumatic components and services to the industrial, forestry and mining industries in the Northwestern Ontario region.

From custom design and engineering to manufacturing and installation, Thunder Bay Hydraulics can deliver end-to-end services on any project. They are specialized in manufacturing industrial cylinders, hydraulic and pneumatic components, materials handling equipment and lift systems. They also carry an extensive inventory of commodities and raw materials.

Thunder Bay Hydraulics distributes all the products offered by the Alltech Group, namely:

• Allfett- Automatic greasing system
• Mega – Range limiting device
• Pfreundt – Weighing system
• NBS-Cam – Backup camera and pedestrian detection
• Blaxtair - Pedestrian detection system
• Laserline – Laser guidance
• OKO – Tire sealant
• Sentinel – Dump up sensor  

Services & Expertise 

Their operations are located in Thunder Bay, Ontario, Canada. All areas of their business, from sales, service, design and manufacturing, to testing, quality assurance, shipping and receiving, are housed under one roof.

They offer an experienced team of mobile service technicians who can quickly deploy to service industrial customers in the region. Their team includes machinists, welders, hydraulic and pneumatic technicians, electricians and design personnel. At Thunder Bay Hydraulics, they are committed to quality, service and helping your business succeed in the north! 

Manufacturing, machining, maintenance, repairs & after-sales services. 

Thunder Bay Hydraulics is a trusted name in industrial manufacturing and repairs. They offer a range of services and trades to solve every day or challenging manufacturing needs. Their large and well-equipped Machine Shop can handle fabrication and repairs, in small or large quantities.

At Thunder Bay Hydraulics, they are known for small town values, while building world-class products that meet the needs of the most demanding industries. 

For more information or to request a quote: 

Thunder Bay Hydraulics

701 Montreal Street,

Thunder Bay, Ontario,

P7E 3P2 Canada

Phone: +1-807-623-3151

Email : info@thunderbayhydraulics.com

Web site : www.thunderbayhydraulics.com  

Alltech Group – The strength of a network!

Our after sales service is our strength. Alltech Group has established a distribution network which insures local services in particular regions. With many distributors across eastern Canada, the Alltech Group puts at your disposal a real network allowing you to ensure service no matter where you are located. Our distributors have highly qualified staff which are trained according to our standards enabling them to perform installations and service calls , as much on the construction sites as within your company. 

The experience of each distributor generates our strength of our network . Together we formed a team that is at your service!

Find a distributor 

The inspection of a lubrication system has 2 parts. 

Step 1: Daily summary inspection

First, a summary visual inspection should be made on a daily basis by the operator;

• Check if there is a thin layer of fresh grease at each lubrication point 
• Make sure all hoses and adapters are in place and not leaking  
• Check the electronic card to make sure there are no alarms 
• Do a test cylce (additional cycle button) on the electronic card to make sure that the pump works well and that the pressure rises on the pressure gauge of the pump

Summary inspection ensures that once the equipment is up and running, everything is functional. No need to turn back for a minor break and lose production time.

Step 2: Full inspection in fall and spring

Afterwardfall and spring are key seasons for full inspections. Fall for snow removal equipment and spring for construction and paving equipment.

Scheduled inspection will allow you to detect and resolve problems before the work. Keeping your equipment in optimal condition can be more productive!

Who does the inspection?

1. Us

The inspection of the lubrication system can be entrusted to a workshop recognized for the services of Allfett systems . This saves you time and ensures that all points are covered. An inspection report is provided to you for each equipment inspected.

Consult the list of authorized distributors:

2. You

Inspection can also be done by your team if you have time . Tools are available to guide you in your operations. 

Download the inspection grid: 

A dedicated section is also available in your Allfett service manual.

You have questions?

Contact our technical department and we will be happy to help you!

Grease is the key element to your lubrication system.

The type of grease chosen is particularly important to keep the system running and will impact the efficiency. Thick grease can cause several problems when temperatures are very cold.

Pumpability of a more fluid grease (EP-0) compared to thicker grease (EP-2) in winter, will help your system work at lower pressure and will help achieve optimal performance.

Below 0°C, EP-2 grease will be very difficult to pump in an automatic greasing system. For example, even though it is indicated on the EP-2 tube that it is pumpable up to -10°C, the grease will not be able to move in the automatic greasing system because of the internal width of the hoses and distribution valves which create restriction. Therefore, reduce the viscosity of the grease to get the optimal performance you need.

Should you still use a thicker grease in the winter, use a synthetic grease instead of a mineral grease. We recommend EP-1 synthetic grease or EP-0 mineral grease in all areas below 48th parallel, as well as temperatures up to -40°C. After that, you will have to downgrade or use full synthetic or more fluid grease.  

Characteristics

After analyzing the working conditions of your automatic greasing system, here are the recommendations concerning the choice of the grease to use. 

Mixing different types of grease may damage your system.

Before changing your grease, make sure the new grease is compatible with the current grease.

Procedures to bleed your system

In order to avoid mixing greases, it is strongly advised to bleed your system. The Alltech Group proposes you a grease replacement procedures in order to avoid damaging your system.

Information and Recommendation about greases

To view our online guide to greases: