Chronics

The inspection of a lubrication system has 2 parts. 

Step 1: Daily summary inspection

First, a summary visual inspection should be made on a daily basis by the operator;

• Check if there is a thin layer of fresh grease at each lubrication point 
• Make sure all hoses and adapters are in place and not leaking  
• Check the electronic card to make sure there are no alarms 
• Do a test cylce (additional cycle button) on the electronic card to make sure that the pump works well and that the pressure rises on the pressure gauge of the pump

Summary inspection ensures that once the equipment is up and running, everything is functional. No need to turn back for a minor break and lose production time.

Step 2: Full inspection in fall and spring

Afterwardfall and spring are key seasons for full inspections. Fall for snow removal equipment and spring for construction and paving equipment.

Scheduled inspection will allow you to detect and resolve problems before the work. Keeping your equipment in optimal condition can be more productive!

Who does the inspection?

1. Us

The inspection of the lubrication system can be entrusted to a workshop recognized for the services of Allfett systems . This saves you time and ensures that all points are covered. An inspection report is provided to you for each equipment inspected.

Consult the list of authorized distributors:

2. You

Inspection can also be done by your team if you have time . Tools are available to guide you in your operations. 

Download the inspection grid: 

A dedicated section is also available in your Allfett service manual.

You have questions?

Contact our technical department and we will be happy to help you!

“H.P.C. Hydraulique Inc.” has been part of the Alltech Group family for 4 years.

It was in September 2017 that HPC made the choice to diversify its products by adding in particular those distributed by the Alltech Group.

Their priority is customer satisfaction. They provide professional service and quality products. Choose H.P.C. Hydraulique Inc. is about getting peace of mind; you trust experienced technician for your equipment.

H.P.C. Hydraulique Inc. distributes all the products offered by the Alltech Group, namely:

• Allfett- Automatic greasing system
• Mega – Range limiting device
• Pfreundt – Weighing system
• NBS-Cam – Backup camera and pedestrian detection
• Blaxtair - Pedestrian detection system
• Laserline – Laser guidance
• OKO – Tire sealant
• Sentinel – Dump up sensor  

Services & Expertise 

Their motto: OUR PRIORITY: SERVICE!

H.P.C. Hydraulique Inc. is proud to supply various industries with hydraulic components and machining of all kinds. Based in Sept-Iles, QC, they are proud to offer fast, personalized and quality manufacturing.

H.P.C. Hydraulique Inc. offers you a complete list of adapted services:

• Supply of hydraulic components
• Repair of hydraulic components
• Refurbishment of hydraulic cylinders
• Refurbishment of hydraulic pumps
• Machining of all kinds
• Mobile mechanic service

For more information or to request a quote: 

H.P.C. Hydraulique Inc.

294 Avenue Noel,

Sept-Îles, QC

G4R 5J2

Phone: (418) 968-5411

Email : david@hpchydraulique.com

Alltech Group – The strength of a network!

Our after sales service is our strength. Alltech Group has established a distribution network which insures local services in particular regions. With many distributors across eastern Canada, the Alltech Group puts at your disposal a real network allowing you to ensure service no matter where you are located. Our distributors have highly qualified staff which are trained according to our standards enabling them to perform installations and service calls , as much on the construction sites as within your company. 

The experience of each distributor generates our strength of our network . Together we formed a team that is at your service!

Find a distributor 

If you ask your operators to program the range limiting device, will they be able to do it without a problem?

This is the question that a CNESST inspector will ask you during his next visit to your site. If the answer is negative, you will have to suspend your activities until your operators have undergone adequate training.

Make sure your operators know how the range limiting device works to avoid unnecessary stops during the working season. Trainings are available. Contact your distributor. Don't wait for the CNESST to come to your construction sites!

Amendment to the Safety Code for Construction works

The CNESST recently made an amendment to the Safety Code for Construction Work (decree 483-2021). This amendment addresses the regulations for electricity, scaffolding, working near a power line, and portable tools.

In this document we learn that operators now have an obligation to receive training on the operation of the range limiting device.

To consult the modification sheet: 

French only 

New decree :

(Decret 483-2021, Gouvernement du Québec)

5.2.2 An employer who proposes to perform work for which a part, load, scaffolding, piece of machinery or person is likely to approach a power line within the minimum approach distance specified at Article 5.2.1 may carry out this work if it meets all the conditions set out in one of the following paragraphs:

˂…˃

ii. the operator of the deployable construction equipment, equipped with a device referred to in paragraph 1, must have received training from the manufacturer to properly use this device.

To consult the complete decree:

French only 

The Alltech Group - The strength of a network!

Alltech Group has established a distribution network which insures local services in particular regions. With many distributors across eastern Canada, the Alltech Group puts at your disposal a real network allowing you to ensure service no matter where you are located. Our distributors have highly qualified staff which are trained according to our standards enabling them to perform installations and service calls , as much on the construction sites as within your company.

The experience of each distributor generates our strength of our network . Together we formed a team that is at your service! 

Semi-Synthetic grease lithium complex 

Groupe Alltech EP-1.5 Semi-synthetic grease is a general-purpose grease formulated specifically to meet the requirements for moderate to heavy loads. .

The select additives used in this unique formulation (Extreme Pressure, Anti-Wear, and Rust & Oxidation) ensure that this grease will perform exceptionally well in the most demanding applications and extend component and equipment life.

Download brochure:

Characteristics:

• Water resistant
• Slow melting
• Resistant to heavy loads
• Rust and oxidation resistant
• Reduces wear
• Will not separate at high RPM
• Fortified with extreme pressure additives for high load capacity
• Stability over a wide range of pressures and temperatures
• Format: Barrel 55kg Cartridge 400gr (1 box: 10 cartridges)

Typical applications :

• Holes and pipe connections
• Flanged connections
• High temperature rings
• Rings lubricated for life
• Heavily loaded slow bearings
• Steam valve stem lubrication

Download MSDS: