Chronics

Amendment to the Safety Code for Construction works

The CNESST recently made an amendment to the Safety Code for Construction Work (decree 483-2021). This amendment addresses the regulations for electricity, scaffolding, working near a power line, and portable tools.

In this document we learn that operators now have an obligation to receive training on the operation of the range limiting device.

To consult the modification sheet: 

French only 

New decree :

(Decret 483-2021, Gouvernement du Québec)

5.2.2 An employer who proposes to perform work for which a part, load, scaffolding, piece of machinery or person is likely to approach a power line within the minimum approach distance specified at Article 5.2.1 may carry out this work if it meets all the conditions set out in one of the following paragraphs:

˂…˃

ii. the operator of the deployable construction equipment, equipped with a device referred to in paragraph 1, must have received training from the manufacturer to properly use this device.

To consult the complete decree:

French only 

The Alltech Group - The strength of a network!

Alltech Group has established a distribution network which insures local services in particular regions. With many distributors across eastern Canada, the Alltech Group puts at your disposal a real network allowing you to ensure service no matter where you are located. Our distributors have highly qualified staff which are trained according to our standards enabling them to perform installations and service calls , as much on the construction sites as within your company.

The experience of each distributor generates our strength of our network . Together we formed a team that is at your service! 

NBS AI100 high-definition intelligent pedestrian detection camera

The NBS AI100 pedestrian detection system adopts DEEP Learning technology to detect pedestrians in real time, to warn the driver of the potential risk of collision with pedestrians and improve driving safety!

The NBS AI100 camera can be installed on the side, front and rear of the vehicle , to intelligently detect pedestrians within a radius of 20M . In addition, this system can be used on any equipment, including: Wheel loaders, excavators, trucks, road rollers, graders, forklifts, mobile cranes, agricultural machinery and more.

Download the brochure:

AI100 high-definition intelligent camera system specification

• Pedestrian and cyclist detection
• Detection range 0.5-20M adjustable
• Adjustable color stripes to show detected areas
• No control box needed, can be directly connected to normal monitors or DVR.
• Camera housing heating under 10°C
• Waterproof/dustproof rating: IP69K
• 1 year warranty

Why NBS?

The ultimate goal of a pedestrian detection system (PDS) is to reduce injuries caused by pedestrian-vehicle accidents. Most of these systems tend to adopt expensive sensors, such as infrared devices, mono or stereoscopic sensors, or the like, with the expectation of better performance. In comparison, a low cost system based on an HD optical camera has great potential practical value, including greater detection range.

NBS offers reversing cameras that have full integrated artificial intelligence and capable of detecting the presence of pedestrians and cyclists (no obstacle detection). This technology is revolutionary and offers equipment fleets a reliable way to manage human / machine interactions. The NBS-Detect AI100 camera adopts DEEP Learning technology to detect pedestrians in real time, to warn the driver of potential pedestrian collision risks and improve driving safety!

• 99% reliable with minimal false triggers
• No additional hardware required
• The pedestrian does not need to wear or carry anything for the system to work (e.g .: badge)
• Compatible with HD monitor to provide high definition camera system
• The NBS AI100 camera can be used on any equipment including: Wheel loaders, excavators, trucks, road rollers, graders, forklifts, mobile cranes, agricultural machinery and more.

The NBS-CAM AI100 is a reliable and efficient camera to meet the safety requirements of the construction, road works, ports and mining sectors.

Groupe Alltech – The strength of a network!

Alltech Group has established a distribution network which insures local services in particular regions. With many distributors across eastern Canada, the Alltech Group puts at your disposal a real network allowing you to ensure service no matter where you are located. Our distributors have highly qualified staff which are trained according to our standards enabling them to perform installations and service calls , as much on the construction sites as within your company.

The experience of each distributor generates our strength of our network . Together we formed a team that is at your service!

Midwest Hose & Specialty, Inc has been part of the Alltech Group family for 3 years.

It was in November 2018 that the company made the choice to diversify its products, notably by adding those distributed by the Alltech Group.

Midwest Hose is known for delivering the best quality, value, and service in the industry. We specialize in certified hose assemblies and quick delivery.

Midwest Hose & Specialty, Inc. will meet or exceed the expected requirements of our customers by providing the finest quality products and service. We will strive for continual improvement and meet our quality objectives as we become one of the foremost suppliers of Hose Assemblies.

Midwest Hose & Specialty, Inc distributes all the products offered by the Alltech Group, namely:

• Allfett- Autolube system
• Mega – Range limiting device
• Pfreundt – Onboard scale
• NBS-Cam – Backup camera and pedestrian detection
• Blaxtair - Pedestrian detection system
• OKO – Tire sealant
• Sentinel – Dump up sensor for truck 

Services & Expertise 

HYDRAULIC COMPONENT REPAIR

Midwest Hose & Specialty, Inc. was founded on the hydraulic industry back in 1983. We know the hydraulic business! We have the resources and the experience to repair, re-manufacture or source almost any hydraulic component, from pumps and motors to designing and implementing a new Wet Line System. Whatever your hydraulic need is, Midwest Hose has the manpower, the resources, and the experience to get the job done.

VENDOR MANAGED INVENTORY

Vendor Managed Inventory gives our customers the opportunity to further minimize downtime and peak performance by having access to bulk hose, fittings and the crimping tools on-site 24/7.

AFTERMARKET EQUIPMENT INSTALLATION

Midwest Hose & Specialty offers a variety of Aftermarket Products for equipment of all types, from Preventative Maintenance to Personnel Safety and Process Efficiencies. Midwest Hose can offer the right product to maximize safety and profits. All products are installed by trained Midwest Hose Technicians and come with Product and Service Warranties.

Two locations to serve you

LAKELAND - Florida

4920 Frontage Road South

POMPANO BEACH - Florida

1550 Northwest 18th Street

Local sales representative

Manuel Bou ( Miami area): mbou@midwesthose.com 

Matthew Larson ( Orlando & Jacksonville area): mlarson@midwesthose.com 

Jason Carrier (Tampa & Fort Myers area): jcarrier@midwesthose.com

Web site: https://mobile.midwesthose.com/ 

Alltech Group - The strength of a network!

Our after sales service is our strength. Alltech Group has established a distribution network which insures local services in particular regions. With many distributors across eastern Canada, the Alltech Group puts at your disposal a real network allowing you to ensure service no matter where you are located. Our distributors have highly qualified staff which are trained according to our standards enabling them to perform installations and service calls , as much on the construction sites as within your company.

The experience of each distributor generates our strength of our network . Together we formed a team that is at your service!

Other distributor : 

The right weighing solution for any dumper

With the scales for rigid frame dumpers, PFREUNDT offers you the perfect weighing solution for almost all types - manufacturer-independent. During unloading, the weight is determined by pressure sensors via the working pressure in the tilting hydraulics for dynamic weighing in the working process.

Download the brochure:

Overview

• Highly precise weighing technology for use under the toughest conditions
• Simple and intuitive operation through touch display
• Comprehensive and customizable master and weighing data management
• Exact activity recording
• Optimum capacity utilisation
• Registration of overloads
• Reliable definition of the weighing range
• Oil pressure sensor with overload protection

Option

• pPrinter (tickets)
• Thermal printer (paper roll)
• PFREUNDT Web portal connection Your weighing data: Accessible. Any time. Anywhere.

 Technical specifications

Alltech Group – The strength of a network!

Our after sales service is our strength. Alltech Group has established a distribution network which insures local services in particular regions. With many distributors across eastern Canada, the Alltech Group puts at your disposal a real network allowing you to ensure service no matter where you are located. Our distributors have highly qualified staff which are trained according to our standards enabling them to perform installations and service calls , as much on the construction sites as within your company.

The experience of each distributor generates our strength of our network . Together we formed a team that is at your service!