[OSYouTube] Alledia framework not found

Permanent Puncture Sealing

Puncture sealing depends partly upon centripetal acceleration (often wrongly described as ‘centrifugal force’). This in the case of a moving vehicle is the force of the tyre’s circulation, and it imparts a huge pressure which – combined with the sudden loss of air – when a puncturing object causes a hole, forces the OKO violently into a small space. The squeezing effect causes OKO to deploy as it is designed to do, turning it from a liquid into a flexible but very strong solid that seals the hole almost instantaneously.

Little air is lost and only a few ml of OKO is used: the rest of the liquid in the tyre well keeps on revolving, ready to counter the next puncture, for the legal life of the tyre.

Unlike other sealant companies, OKO has invested heavily in independent testing, using meaningful protocols. To assess whether its seal is genuinely permanent, a strength test was carried out by the world-renowned military testing institution, Gerotek. The tyre industry recognises two ‘permanent’ repair types: vulcanising and plugs. On testing each system to destruction, the Institute found that OKO was 1.6 times stronger than vulcanisation: and 7 times stronger than a plug repair.

People often ask why the OKO does not gum up a tyre valve when you let a little air out. In this situation there is no centripetal acceleration and the OKO is not deployed, also the sealant is not normally in proximity to the valve.


How OKO works 



OKO is built to last. Based upon water and anti-freeze agents, it is formulated so that all of its active ingredients remain in suspension and no shaking is required. Far too many water-based sealants require you to shake before using – and that is the sign of a sealant that will not work for the long term.

Many people have tried to analyse and duplicate the OKO formulae but all have failed: because some of the most critical elements are present in such small quantities that they will not register in analyses.

We also do not skimp: from the quality of the rubber crumb particles, to the fibres and the powders that act to seal the punctures by bonding with the rubber tread, we select the best, not the cheapest. Cutting-edge products from the leading chemical companies in the UK, Germany and USA are deployed to maximum effect.


Added Benefits Deploying

OKO brings with it added-value benefits that help to lengthen tyre life. All tyres are porous and many vehicles run on under-inflated tyres, leading to uneven tyre wear as a result. OKO seals the tread area, thus reducing air loss. The liquid helps to draw away some heat from the tread, which builds up its temperature the longer it is in motion. Heat and under-inflation are the prime causes of premature tyre wear. The rubber suffers from drying out and the friction effects of the road and the wheel/tyre drag also contribute to wear. OKO can help to condition the tyre from inside.

Be part of the team!

We are presently seeking serious partners with experience; enthusiasm and willing to build there own company with a strong emphasis on customer service. A limited number of distributor licenses is established to develop the desired strategic model for the Alltech Group.




NBS radar detection system installed on a Komatsu loader

IMAGE Monday, 01 March 2021
Installation of a NBS radar detection system on a Komatsu WA480 loader.   The installation was made by « Groupe Alltech »; authorized distributor...

Range limiting device installed on a Caterpillar 340-07 excavator

IMAGE Tuesday, 23 February 2021
Installation of a MEGA range limiting device on a Caterpillar 340-07 excavator.   The installation was made by « Groupe Alltech »; authorized...

Automatic greasing system installed on a Caterpillar excavator

IMAGE Thursday, 11 February 2021
Installation of an ALLFETT lubrication system on a Caterpillar 336 excavator.   The installation was made by « Hydraulique Val-d’Or »;...

3000th Allfett System!

IMAGE Tuesday, 02 February 2021
The 3000th Allfett Lubrication System has been installed by the Alltech Group!   The installation of the 3000th Allfett system was performed on the...

Automatic greasing system installed on a John Deere grader

IMAGE Thursday, 28 January 2021
Installation of an ALLFETT greasing system on a John Deere 670GP grader.   The installation was made by « Groupe Alltech »; authorized distributor...


Solution Mécanique Diésel, authorized distributor for the Capitale-Nationale and Chaudières-Appalaches region (Canada, QC)

IMAGE Tuesday, 23 February 2021
Solution Mécanique Diésel has been part of the Alltech Group family for 2 years.     It was in January 2019 that Sylvain Raymond, Owner and...

Forklifts are the root of many accidents and even deaths.

IMAGE Monday, 15 February 2021
Forklifts are powerful material handling machines that are used in many different work areas. They are the root of many accidents and even deaths....

Five criteria to consider when choosing an on-board scale

IMAGE Thursday, 11 February 2021
Today, quarries and sand pits are more competitive than ever.   Your ability to load more precisely and more efficiently than a competitor can make...

360° camera system & NBS-Cam radar detection

IMAGE Thursday, 04 February 2021
Installation of a 360° Camera system & a radar detection system on a bus.   The installation was made by « Groupe Alltech »; authorized...

Bernard Paysagiste trusts OKO puncture free

IMAGE Tuesday, 26 January 2021
For almost 2 years, Bernard Paysagiste's team has been using OKO puncture free products.     Whether for heavy equipment or for trucks, all tires...


Don't wait until problems occur!

Contact your sales representative to know which products if offered for your industry.



Contact us

Alltech Group
250, rue Rodolphe-Besner #30,
Vaudreuil-Dorion, Qc, J7V 8P2

Phone: 450.218.6677
Toll free: 1.855.730.5555
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Opening hours:
monday to friday 8h am to 4h30 pm

© 2015 Groupe Alltech. All Rights Reserved.