Main objective; Protect your equipment!

Shortage of grease, heavy loads, dust and water prematurely wears out your moving parts of the machine.

Optimal performance of the machine.

According to lubrication studies, the best practice is to lubricate frequently in small quantities, better then less often using a large quantity of lubricant. This practice can translate in an optimal performance of the machine. Therefore, the right quantity of lubricant distributed to each point plays a major role. To under lubricate or to over lubricate can have a negative effect and must be avoided.

A regular lubrication with the right quantity permits to maintain a film of grease on each point.

This prevents contamination of your surfaces by sealing the interstice around each of them. This collar keeps out dust, sand, water and other contaminants. It also prevents impurities to create abrasive surfaces along with premature wear.

Therefore, the installation of an automatic lubrication system allows to protect your equipment!

Solutions available

The Alltech group offers a personalized solution to all industrial sectors. Our solutions would simply allow you to maintain your equipment to an optimal, efficient and reliable state.

Versatile system which is personalized very easily to all applications.

The driver has only to follow the laser spot on the road

It’s more versatile. It’s easier. It’s faster. It’s safer!

The laser guidance uses an ultra high visibility green laser to establish visual line control.

For paint striping machine, gun carriage package, asphalt distributor, road widener, pavement profiler or virtually any application requiring vehicle line control.

The laser spot is impacted directly on the road surface and shows the Operator exactly where the vehicle is relative to “on line.” The laser spot is on the road ahead of the Operator so that the reference is in the driving field of view instead of a T.V. screen or boom pointer.

Why Laserline?

Reduce or eliminate pre-marking and the high cost associated with it.

Eliminates having to drive looking at a T.V. screen instead of the road.

Greatly increases the machine’s maneuverability.

Much less strain on the Operator. It reduces fatigue and increases skill load.

You are looking in your natural driving field of view at the reference point

For more informationn about LASERLINE guidance

This risk is rarely properly evaluated

The overturning of trucks along with the dump trailers is a major cause for serious and fatal accidents in the transport sector. The majority of the time they are due to the lack of knowledge of the stability principles linked to unloading the dumper.

Factors to consider in order to prevent the risk of overturning

1. Loading 

• Choose a vehicle adapted to the materials to be transported ;
• Respect the maximum load authorized of the trailer ;
• Set the maximum duration for the conservation of hot materials that are in the dumper before unloading in order to avoid the risk of sticking. ;
• Use an insulated and covered dumper for hot materials.

2. Surroundings of the unloading point

• Use an onboard device which assists against overturning which measures the lateral tilt of the dumper while it’s raising and alerts the driver ;
• Establish a safety protocol and implicate all the necessary measures to prevent the risks identified at the points of unloading and loading;
• Clear the unloading zone, consists of the allocated unloading points.

3. Method of unloading 

• Train the drivers specifically of the operations of loading and unloading with the adequacy of the activities undertaken.
• Give instructions to follow for the drivers «What to do if? »...
  • The unloading point is inadequate?
  • The climate conditions are poor (lateral winds, cold, rain)?
  • The loads adheres to the sides?
  • Avoid side by side unloading, if impossible organize the operations to take into account a secure distance to maintain in between vehicles. (The secure distance consists of the minimum height of the vehicle when the dumper is completely raised)
• Integrate the time when the dumper is descending (with the vehicle stationary) to the operation plans.

4. Vehicle 

• Do the maintenance of the vehicles ;
• Respect the warning instructions of the maintenance and use of the trailer.

Tools are available to help the driver's vigilance;

Save time and money with Sentinel.

Increase the productivity of your equipment,

while ensuring the safety of your employees.

Our systems can be installed on all types of machines;

Excavation

Excavator, Wheeled loader, Backhoe, Articulated Truck, Grader, Dump Truck, Telehandler, Track loader, Bulldozer, Compact machinery

Cement

Cement truck, Wheeled loader, Dump truck, Pre-mixer, Conveyor

Demolition

Mini Wheeled loader, Articulated Truck, Excavator, Material handler, Wheeled loader, Track loader

Attachments

Cement pulverisor, Shear, Hydraulic hammer

Offered solutions

Automatic lubrication

The ALLFETT greasing system protects your equipment; it insures a continuous greasing to the points at regular intervals.

Shortage of grease, heavy loads, dust and water prematurely wears out your moving parts of the machine.

Example of installation on a small excavator

Example of installation on a loader

Range limiting device

Safety device and assistance for equipment operators.

It limits the risk of the machine to come into contact with environmental obstacles

Weighing system for loader

Saving time, reducing cost and improving operations.

Allows an easy and efficient on-the-spot weighing.

Backup camera

NBS-CAM - Avoid vehicle blind spots

Backup camera system for heavy equipment

Example of installation on an excavator

Security system for dump truck

Designed to help the driver be more vigilant.

Sentinel 1.0 Security system for raised dumper and/or PTO Activated.

Informs the driver when the truck is functioning and the dumper is rised.

Sentinel 2.0 Security system which prevents overturning

Informs the driver of potential dangers of height and tipping.

Tire sealant

Speed-rated puncture protection treatment

Can seal multiple punctures as you drive, thus allowing commercial tires to remain operational for longer.